CARTIF PROJECTS
INFIT
Keeping the safety of the entire rail network
Description
Keeping the safety of the entire rail network and, above all, critical elements such as tunnels, becomes a fundamental and priority objective for the Strategic Plan of Infrastructure and Transport (PEIT). For this, the potential causes of problems must be detected, usually cracks and fissures, and their growth must be controlled. Current evaluation systems are slow, subjective and unreliable.
In INFIT, automatic data capture systems have been developed to obtain an accurate and objective image of the tunnel surface. New tools have been developed that are capable of detecting, classifying and monitoring the cracks and fissures that may appear, as well as a system for the prevention of potential risks that may affect the integrity of tunnels, users and workers.
Objectives
- The development of a new railway tunnel inspection system based on the integration of image acquisition devices and active lighting equipment capable of highlighting fissures or cracks.
- The development of detection algorithms to facilitate the location and measurement of size and orientation of cracks and fissures that may jeopardize the integrity of the tunnel.
- The implementation of monitoring tools that allow the evaluation of the growth of defects detected through analysis and comparison of successive periodic inspections.
Actions
- Analysis and specification of the technical requirements of the tools for inspection, detection and tracking of cracks and fissures.
- Development of a crack inspection prototype, designing its architecture, synchronizing the acquisition devices and manufacturing the platform.
- Technologies and methods of detection, measurement and tracking of fissures using image processing algorithms.
- Integration, prototype validation and demonstration of the complete system in real environments.
Expected results
- An inspection system of 100% of the surface of the tunnel through the use of linear cameras with a resolution per pixel between 1- 0.25 mm2.
- Crack detection algorithms for the location and determination of size and position of cracks and fissures.
- Tracking tool that automatically, accurately and objectively evaluates the growth of the cracks detected by algorithms for comparing successive inspections and automatically generates monitoring reports.
Partners:
INNPACTO 2012
INFIT: IPT-2012-0980-370000
Presupuesto total: 620.006,75 €
Contribución 206.289,70 €
Duración: 24 meses: Octubre 2012 – Octubre 2014
Responsible
Roberto Medina Aparicio
Divison of Industrial and Digital Systems
Networking
Cultural and natural heritage projects:
Starts SMARTeeSTORY, the project that aims to turn historic buildings into climate-neutral landmarks
The SMARTeeSTORY consortium, composed of 13 partners from six different countries, held its kick-off meeting last week in Genoa, Italy, to discuss the main objectives and establish a roadmap for this initiative that will seek to transform historic buildings into...
CATCO2NVERS project holds its 5th follow-up meeting in an event at CARTIF
CATCO2NVERS, the project funded under the European Union's Horizon 2020 research and innovation programme based on technologies for the conversion of CO2 into high added value products, has held its 5th follow-up meeting in a face-to-face event at CARTIF's facilities...
IAM COMPACT
IAM COMPACT supports the assessment of global climate goals, progress, and feasibility space, and the design of the next round of Nationally Determined Contributions (NDCs) and policy planning beyond 2030 for major emitters and non-high-income countries.
The REHOUSE Project holds its second General Assembly to review the profess of the last few months
The REHOUSE project, led by CARTIF, held its second General Assembly on 10 and 11 May at the headquarters of the Institut National de l'Énergie Solaire (INES) in Le Bourget-du-Lac (France), organised by the French Alternative Energies and Atomic Energy Commission...
CARTIF led BuildON project kicks off to build ‘the next generation of smart buildings’
The BuildON project, whose main objective is to achieve smarter buildings to improve their energy performance, has held its kick-off meeting this week at CARTIF. During these days, the consortium from nine European countries has met at the centre's own facilities,...
The NATMed project, coordinated by CARTIF, aims to improve the water cycle in the Mediterranean region
The NATMed project has been launched at CARTIF to improve the water cycle in the Mediterranean region by tackling the scarcity and seasonality of water resources through Nature-based Solutions (NBS). The aim of this initiative, coordinated by the technology centre, is...
The HOUSEFUL project closes its five-year trajectory with a webinar next 26th April
The HOUSEFUL project is coming to an end and to celebrate it, the consortium has organised an online session open to the public on Wednesday 26 April. After five years of research and development in circular economy applied to the housing sector, this meeting will...
PREDICTIVO dB
PREDICTIVOdB seeks to develop an innovative solution for the maintenance of wind farms that is quick to implement and has low energy and economic requirements.
LEGUATER
The objective of LEGUATER is the development and application of two innovative technologies for the treatment of legume processing water both in the laboratory and in a pilot plant.
PISTIS
PISTIS brings forward a reference federated data sharing/trading and monetisation platform for secure, trusted and controlled exchange and usage of proprietary data assets and data-driven intelligence.
ASCEND
ASCEND aims to accelerate the implementation of Positive Clean Energy Districts (PCEDs) for the transformation of cities towards climate neutrality and social justice in Europe. To this end, Ascend will carry out the following measures.
CO2SMOS
CO2SMOS project propose an innovative solution to develop new technologies based on processes for the conversion of biogenic CO2 and renewable raw materials into high value-added (bio)chemical products for chemistry sector and bio-based industries.
Contribution to the substitution of fossil fuels by biofuels to help reduce global warming.
CARTIF projects Contribution to the substitution of fossil fuels by biofuels to help reduce global warmingDescriptionBiofuels offer greater energy security, lower greenhouse gas and particulate matter emissions, rural development, better vehicle performance and a...
Renewable hydrogen and natural gas production and storage
The project focuses on the development of an integrated process for the production of green hydrogen and hydrogen carrier molecules (energy carriers) for use as renewable fuels to replace current fossil fuels.
Sustainable process for the efficient recovery of metals from wasted electric vehicle batteries
Recovery of metal oxides present in the cathode of electric vehicle battery cells by means of hydrometallurgical and direct recycling processes.
Innovation in rapid methods for the detection of biomarkers of interest in agri-food, environmental health and biomedicine
Las líneas de investigación de CARTIF en calidad de aire interior y mejora de la calidad alimentaria buscan ir un paso más allá en las capacidades analíticas y experiencia que se tienen actualmente para trabajar en aplicaciones dentro de los sectores de la salud ambiental, la agroalimentación y la biomedicina.
HUMAIN
HUMAIN focuses on industrial research and the creation of synergies in two use cases of complex production processes: Vertical enabling technologies and boosting these technologies by using AI, IIoT and machine vision.
ROSBAC
The objective is to develop a new generation of Socio-Bio-Cooperative robotic devices based on haptic technology combined with the novel Socio-Bio-Cooperative control approach to robotic systems, which proposes to use the biophysical signals of the users to adapt their reaction to the user’s state.
BUILDSPACE
BUILDSPACE aims to couple terrestrial data from buildings with aerial imaging from drones equipped with thermal cameras and location annotated data from satellite services to deliver innovative services for the building and urban stakeholders and support informed decision making towards energy-efficient buildings and climate resilient cities.
REGIONS4CLIMATE
The Regions4Climate project aims to collaboratively develop and demosntrate a socially-just transititon to climate resilience. Based on cross-sectoral roadmaps developed together with regional stakeholders.
MATRYCS
The main objective of MATRYCS is to define and deploy a Reference Architecture for Buildings Data exchange, management and real-time processing, and to translate this reference architecture into an Open, Cloud-based Data Analytics Toolbox. It will enable AI-based cross-sector analytics for smart energy-efficient buildings, based on seamless data-information-knowledge exchange under respective sovereignty and regulatory principles.
FUSILLI Project will organize in June the next meeting of EU FOOD 2030 cluster
FUSILLI, one of the five-member projects of EU FOOD 2030, will be in charge of organizing the next quarterly meeting of the cluster which will take place in June 2023. These sessions, framed within the joint initiatives between projects, share the progress of each of...
CERFLEX
CERFlex project consist on research in development and TIC solutions implementation moods that help to the deployment in a new concept of energy communities, especially focus on rural environment, facilitating a decentralized management of the energy interchange, the maximum utilisation of the renewable resources and a sustainable consume of the available resources.
AGISTIN
AGISTIN will enable industrial users to rapidly deploy renewable energy through advanced integration of innovative energy storage technologies. The rapid decarbonisation of industry through electrification, the growth of renewables and the need for grid stability represents a unique opportunity for new forms of storage and schemes for grid integration.
PROBONO
PROBONO brings together a European multidisciplinary consortium of 47 partners, to turn the six European districts into Green Building Neighbourhoods, with positive energy balance and zero carbon emissions: two large-scale demonstrators and four living labs representing business/owner promoters of the green buildings and neighbourhoods transition.
SUPERSHINE
SUPERSHINE project is based on the renvoation of 3 pilot lighthouse districts focusing on the needs of the social housing inhabitants and on social assets generating high social capital and cohesion.
ALL-TO-GAS
The main objective of this propoal is the development of a process technique and economically viable ans sustainable by the integration of technologies (HTC, pyrogasification, biological methanation, reforming) for the conversión of biomass and residues, both dry and with a high content in humidity, in green methane and green hydrogen
The TALENT project, coordinated by CARTIF, has held the sixth monitoring meeting in Zaragoza, in CIRCE’s facilities
The TALENT project aims to promote the grid integration of electrical storage through batteries, reducing costs and improving efficiency, encouraging grid flexibility. The team in this initiative, funded by the EU H2020 Programme, gather six companies, three...
MOVE2CCAM
The project has as main objective to quantify the impact of the massive deployment of autonomous and connected mobility solutions in Europe through the development of a tool based in systems dynamic that will be build as of citizens and organizations perceptions collected in co-creation activities.
NEUTRALPATH project tries to prove the viability of deployment Positive and Clean Energy Districts (PCED) in cities to attained climate-neutrality
CARTIF hosts the kick-off meeting of the NEUTRALPATH project, a pioneer European initiative to prove the deployment of Positive and Clean Energy Districts (PCED) in cities is fundamental to way towards to the climate-neutrality in time horizon 2030. The proposal,...
TERARED
TERA_RED aims to generate technical scientific knowledge on very low temperature networks. These networks, also called anergy, neutral or 5G networks, have been studied by applying the scientific method on a laboratory scale, both virtual and experimental.
STARCONNEXION
StarConnexion aims to lay the scientific and technological foundations for the application of Artificial Intelligence in quality management in long steel mills based on all possible variables that affect the final quality of the product.
CARTIF hosts these days CIRAWA project kick-off meeting to promote agro-ecology in West Africa
The CIRAWA project, coordinated by CARTIF, celebrates its kick-off meeting today at the centre’s facilities, located in the Boecillo Technology Park, (Valladolid,Spain), with the aim of laying the foundations that will guide the entire consortium towards the...
H2METAMO
H2METAMO focuses on the development of compact and efficient plants for the generation of hydrogen carrier molecules. It has two main lines: one to generate methane and one to produce ammonia.
GARNOVA
GARNOVA born as a response to gorwing cosumer demand for healthier snacks. Sugggests the development of a new range of innovative snacks, elaborated as of healthy, functional and with high content in essential macro and micronutrients.
NEUTRALPATH
NEUTRALPATH has an objective to demonstrate the deployment of clean and positive energy districts (PCED) designed through participative processes focused on the citizen and that contributes significantly to the transformation of cities towards climate-neutrality at the time horizon 2030.
ADCONTROL
ADCONTROL is a project that focuses on implementing asset monitoring and control architectures to manage the comfort of dwellings that are part of condominiums or neighbourhoods.
CIRAWA
CIRAWA will boost the implementation of agro-ecology in West Africa, thus facilitating the transition to a more sustainable food system.
CARNIQUS
CARNIQUS aims to respond to the current needs of the meat sector in terms of meticulous control of those parameters directly involved in the deterioration of its products.
REBELION
The general objective of the REBELION project is to obtain an innovative technical process in the C&L region for the recovery of materials present in lithium-ion batteries of electric vehicles at the end of their useful life.
NOVACARNI
NOVACARNI project aims to contribute to the production of a new meat food with a lower environmental impact, in order to promote the production of healthier and more environmentally friendly food.
EIAROB
CARTIF PROJECTS EIAROBAmbient intelligence ecosystem for the support of long-term care at home using social botsDescriptionEIAROB project has as main objective promote the autonomy and quality life of elder and dependent people. The project is articulated in 3 axes:...
GEDERA
GEDERA is a research project whose objective is the study and development of a multi-agent architecture that allows the development of applications for the smart grid, focusing the project on the management of flexibility in buildings.
WoodLi
WoodLi project focuses on the development of bioadhesives for use in the manufacture of wood-based panels used, among others, in the construction sector. The bioadhesive of the WoodLi project will differ from commercial adhesives in that it will be of renewable origin and will not present toxicity problems
INTELIFER
INTELIFER consists of the optimisation of the process and products of a granulated NPK fertiliser manufacturing line with the support of Artificial Intelligence.
Push2Heat
The PUSH2HEAT project works on the development and demonstration of waste heat revalorisation technologies in industry, revalorising heat in a temperature range of 90-160ºC.
InvestCEC project launched to unlock financing for the circular economy
European consortium will develop a replicable model for implementing circular economy projects in cities and regions by improving collaboration between entrepreneurs, investors and policy makers 17 November, Klagenfurt am Wörthersee – The Horizon Europe project...
InvestCEC
InvestCEC will develop a pelicable model to implement circular economy projects in cities and regions of all Europe, taking into account all the interested relevant parts.