CARTIF PROJECTS
INFIT
Keeping the safety of the entire rail network
Description
Keeping the safety of the entire rail network and, above all, critical elements such as tunnels, becomes a fundamental and priority objective for the Strategic Plan of Infrastructure and Transport (PEIT). For this, the potential causes of problems must be detected, usually cracks and fissures, and their growth must be controlled. Current evaluation systems are slow, subjective and unreliable.
In INFIT, automatic data capture systems have been developed to obtain an accurate and objective image of the tunnel surface. New tools have been developed that are capable of detecting, classifying and monitoring the cracks and fissures that may appear, as well as a system for the prevention of potential risks that may affect the integrity of tunnels, users and workers.
Objectives
- The development of a new railway tunnel inspection system based on the integration of image acquisition devices and active lighting equipment capable of highlighting fissures or cracks.
- The development of detection algorithms to facilitate the location and measurement of size and orientation of cracks and fissures that may jeopardize the integrity of the tunnel.
- The implementation of monitoring tools that allow the evaluation of the growth of defects detected through analysis and comparison of successive periodic inspections.
Actions
- Analysis and specification of the technical requirements of the tools for inspection, detection and tracking of cracks and fissures.
- Development of a crack inspection prototype, designing its architecture, synchronizing the acquisition devices and manufacturing the platform.
- Technologies and methods of detection, measurement and tracking of fissures using image processing algorithms.
- Integration, prototype validation and demonstration of the complete system in real environments.
Expected results
- An inspection system of 100% of the surface of the tunnel through the use of linear cameras with a resolution per pixel between 1- 0.25 mm2.
- Crack detection algorithms for the location and determination of size and position of cracks and fissures.
- Tracking tool that automatically, accurately and objectively evaluates the growth of the cracks detected by algorithms for comparing successive inspections and automatically generates monitoring reports.
Partners:
INNPACTO 2012
INFIT: IPT-2012-0980-370000
Presupuesto total: 620.006,75 €
Contribución 206.289,70 €
Duración: 24 meses: Octubre 2012 – Octubre 2014
Responsible
Roberto Medina Aparicio
Divison of Industrial and Digital Systems
Networking
Cultural and natural heritage projects:
REHOUSE
REHOUSE project has as main objective the development and demonstration, up to TRL7, of 8 renovation innovative technologies packages, designed for covering a wide range of building renovation actions, allowing overcome the actual barriers that makes the renovation rates in Europe being low.
Knowledge for improving indoor AIR quality and HEALTH: K-HEALTHinAIR project kicked-off in CARTIF
16 partners from 8 European countries, led by CARTIF, have joined forces to collaborate and achieve the objectives of the K-HEALTHinAIR project. This consortium will provide a scientific-based assessment of the indoor air quality (IAQ) effects in health, based on the...
ECLOSION
The general objective of ECLOSION is the research and development of new solutions at a pilot plant scale at a laboratory level for the generation, management and usage of green hydrogen and biomethane using bioresidues as abundant resources of quality in a stable and affordable mode.
ECOESION_TOOL
The main objective of Ecoesion_tool project is the implementation of a web-based, easy-to-use and user-friendly tool based on the Ecoesion model developed by the University of PISA (UNIPI)
MITIGACRYL
MITIGACRYL has as objective develop a quick and precise analytic method for the determination at the production line of the acrylamide levels through mid-near infrared technologies.
INPERSO
INPERSO is a holistic project of deep renovation of buildings that address all its life cycle and combines industrialization and customization. INPERSO will integrate new technological components that joint with pre-manufacturing advantages, preintegration and 3D printing robotic will reduce drastically time and costs of the construction.
MOVE2CCAM project holds kick-off meeting to help deploy autonomous vehicle technology
The MOVE2CCAM project (MethOds and tools for comprehensive impact Assessment of the CCAM solutions for passengers and goods – CCAM stands for Connected, cooperative and automated mobility solutions) held its kick-off meeting in Stuttgart (Germany) on 13 – 14...
FREE4LIB
The aim of FREE4LIB is to develop a TRL 5-6 level technologies to reach 6 new sustainable and efficient processes to recycle li-batteries at the end of their life cycle.
SESAMO
Design, configure, programme and adapt a system that facilitates and assists the user in their relationship with the cabinet doors.
NEVERMORE
NEVERMORE will support excellence in climate research overcoming the current approach in evaluating climate change impacts and risks across sectors and adaptation and mitigation policies and measures.
S4UG
S4UG is a feasibility study that pretends to demonstrate the technical and commercial feasibility of the services based on the observation of the Earth that addresses the design, planification and management of the urban green infrastructure.
EU FOOD 2030 project family
The EU FOOD 2030 Project Family is a collaboration of five EU Horizon projects coordinating synergistic cross-project initiatives towards a sustainable transformation of the European food system aligned with European Commission’s FOOD 2030 and Farm to Fork Strategy....
EVPLAN
EVPLAN looks for developing tools that use as strategic decision making base that benefit users and future consumers of the electric vehicle
PACES Logroño
The aim of the project is the preparation and elaboration in the framework of the Deal of Majors for the Climate and Energy, of the Plan of Action for the Climate and Energy Sustainable of the municipality of Logroño.
Veolia, new member of the CARTIF Assembly
Veolia, a leading company in the optimised management of resources, joins the CARTIF Assembly to support the Centre’s activities and thus give continuity to ten years of collaboration in multiple research and technological development projects. This was started by the...
CARTIF participates in the H2MetAmo Project of the Renewable Energy and Hydrogen Complementary Plan, funded with 2.7 million euros
The Ministry of Science and Innovation of Spain, within the complementary plans 2021. Through which it develops its Recovery, Transformation and Resilience Plan, has approved the research project, presented by the Junta de Castilla and León at the proposal of the...
REVaMP project holds second follow-up meeting on efficient use of metals
The REVaMP project held its second management meeting on 21-22 June at the National Nuclear Research Centre in Otwock (Poland). This was an opportunity for all staff to meet face-to-face and share challenges and experiences. The project consortium, made up of 16...
K-HEALTHinAIR
K-HEALTHinAIR busca evaluar la calidad del aire interior en 9 diferentes escenarios representativos a nivel europeo en base a una campaña de monitorización de parámetros físicos, químicos y biológicos. El estudio se llevará a cabo en 5 pilotos diferentes distribuidos por toda Europa: Barcelona, Rotterdam, Baden-Wurtemberg, Polonia/Austria y Noruega.
NEVERMORE project holds its kick.off meeting to lay the gourndwork for improved climate change analysis and assessment
The NEVERMORE project kicks off with a session in which the consortium partners met and laid the groundwork for improved climate change analysis and assessment.
Badajoz hosts the fourth monitoring meeting of the LIFE myBUILDINGisGREEN project
The Hispital-Vivo of Badajoz was the chosen venue of the fourth monitoring and coordination meeting of the LIFE myBUILDINGisGREEN project in a face-to-face sessions attended by partners from both Spain and Portugal. Pilar Muñoz, head of the ODS, Parthnerships and...
Valomask project receives the Sustainability and Environment award from Onda Cero Valladolid
Onda Cero Valladolid (Spain) held its first awards gala yesterday in a night where "the commitment, dedication and effort of Valladolid society over the last year" filled the Miguel Delibes Auditorium with a special light. Valomask project, coordinated by FCC Medio...
The European Commission and the Swiss State Secretariat for Education, Research and Innovation award funding for an €8.2 million to AeroSolfd project on cleaner urban air
In May 2022, the innovation AeroSolfd project started with a kick-off event in Ludwigsburg, Germany. The AeroSolfd consortium – led by MANN+HUMMEL – will deliver affordable, adaptable, and environmentally friendly retrofit solutions to reuce tailpipe and brake...
MOD4SMART
MOD4SMART aims to apply smart technologies to improve the energy and operational performance of the buildings focusing on industrialised construction as key future element in this context, and carrying out research and development on simplified models to be integrated in building smart systems.
CARTIF recieves the Iberdrola Award for the Best University Research in the Innovators 2022 Awards for the sensors of the elderly project
Pablo Lago, editor for the Diario de Castilla y León, gave away yesterday to the thirteen winners of the Innovators 2022 Awards at the Business Solutions Centre in Arroyo de la Encomienda, including CARTIF and the and the University of Valladolid with the Iberdrola...
AEROSOLFD
AEROSOLFD aborda el reto de mejorar la calidad del aire en zonas urbanas debido a las emisiones de partículas nocivas del transporte rodado, especialmente las debidas a los tubos de escape y al uso de frenos.
The CircThread project, led by CARTIF, is set to revolutionise the world of the circular economy and the management of household applicances
The CircThread project, led and coordinated by CARTIF, is one year old and to celebrate it has organised its first face-to-face General Assembly on 7 an 8 June at the Centre’s facilities in the Boecillo Techbology Park (Valladolid, Spain). A session in which the 31...
s-x-AIPI
The overall objective of s-X-AIPI (self-X Artificial Intelligence for European Process Indsutry digital transformation) is to research, develop, test and experiment an innovative toolset of custom trustworthy self-X AI technologies and applications.
SUPERA
SUPERA project is based on increasing and improving the knowledge of the mechanisms of action of RNAi in the framework of plant health, thus boosting agricultural productivity and environmentally friendly forest health. Environmental RNAi refers to the uptake of RNAs from the environment that can induce systemic gene silencing in the organism.
SPANDAM
Development of a simulation tool to support decision-making and the design of public policies aiming to achieve a balanced and sustainable demographics, socieconomic and environmental development in areas affected by depopulation.
CARTIF hosts the Kick-Of-Meeting of the s-X-AIPI project to settle the pillars of work for the coming months of researches
The s-X-AIPI project, an Horizon Europe initiative led by CARTIF, has started this month and to celebrate it, the consortium has organized a face to face meeting in the facilities of CARTIF in Boecillo (Valladolid, Spain). During the working sessions, which took place...
PhotonHub Europe
PhotonHub Europe is the unique european Hub (DIH) in photonic that integrates the best technologies, facilities and knowledge in photonics as well as the experience of 53 partners of all Europe. The result is the creation of a unique window that offers a huge variety of support resources for industry to accelerate the integration of photonic in its products and processes.
The CO2SMOS project holds its regular M12 meeting and General Assembly in a face-to-face event in CARTIF
The CO2SMOS project, with the technical and financial coordination of CARTIF, is one year old and to commemorate it, all the partners of the consortium have gathered in person at the facilities of the technology centre in Boecillo (Valladolid, Spain) to hold their...
RethinkAction
Development of a cross-sectoral decision-making platform to foster climate action, focusing on climate mitigation and adaptation.
Damperdoor
DAMPERDOOR looks to develop a competitive system and of high benefits for sliding doors in furniture sector. These features aim for a self-controlled closure, independent of the excessive force that a user may bring to the closing action, thus avoiding shocks and with the ability to complete the travel to a full and accurate closure.
RENERMap
The main objective of RENERMap is to achieve a detailed analysis of the renewable potential available at local level, including both roofs and municipality land, to respond to the demand of energy that it generates, and to help to achieve the development of self-sufficient energy municipalities.
TREEADS Project – A Unifying Technological Ecosystem for Integrated Fire Management and Adaptive Forest Restoration in Changing Socio-Ecological Contexts
TREEADS, a large-scale EU Green Deal project, brings together a consortium of 46 partners from 13 European countries and Taiwan, in the fight against wildfires. TREEADS will increase the effectiveness of enhanced sustainable fire and forest management under...
Happening
HAPPENING project is developing a solution based on decentralised heat pups tha are easy to install, low-intrusive for the building´s occupants and easily adaptable to a large number of different building situations.
Sustainable Biofuel Generation and Purification Process
The project is focus on the valorisation of agro-industrial organic residues for the production of biomethane, through anaerobic digestion processes. Also, the use of technologies for the treatment of gaseous and liquid streams will be based on membrane contactors and reverse osmosis membranes, respectively. On the other hand, pretreatment of samples with microwaves will also be studied.
New equipment in advanced digital manufacturing
This proposal focuses on the Fab LAb (Fabrication Laboratory) concept, which is a digital fabrication workshop for personal use, i.e. a space for the production of physical objects on a personal or local scale that brings together machines controlled by computers. Its particularity lies in its size and its strong link with society rather than industry.
Development of research lines on air quality and agro-ecological processes.
The research lines of AIR QUALITY and AGRO-ECOLOGICAL PROCESSES seek to achieve sustainable solutions to alleviate environmental problems such as poor air quality, urban green regeneration, environmental well-being in cities, management and restoration of urban watersheds, sustainability in the use of resources and energy in cities, conservation of urban ecosystems…
VALOMASK
VALOMASK project aims at the design and development of sustainable management of single use face masks in the context of the COVID-19 outbreak. The initiative arise due to the exponential increase in medical waste generated during the pandemic.
AgriGenomics Hub
The project focuses on boosting the biotechnology activity in the agroindustry in Turkey, from the farm to the agro company, throughout knowledge, technologies and new products arising from the creation of a research and innovation centre focused in the agrogenomic study of animals and plants
The PROBONO project was born to turn buildings and neighbourhoods into examples of sustainability and energy efficiency
The PROBONO project borns to convert neighbourhoods and buildings into greener, more sustainable, energy-positive places with zero emissions.
5R
The 5R Network, Cervera network in Robotic technologies for intelligent manufacturing, has as its mission to establish a collaborative network, equipped with the necessary technology, tools and infrastructures to act as a driving force for the development and introduction of new robotic technologies in the industrial fabric.
E-MINE
E-MINE is a research and development project that seeks to implement the electric vehicle in mining environment authomatizing the management of charges and the estimation of capacities according to the metheorological conditions and charge needs of each vehicle according to the work to be carried out.
Survey IN-PACT Project
Due to the importance of achieving a more sustainable food chain and achieving the transition towards a sustainable food system, IN-PACT project arises, within the framework of Green Deal and the Farm to Fork (F2F) strategy. It is a collaborative project between JRC...
FRONTSH1P
Frontsh1p will contribute to further the green transition in the Polish region of Lódzkie. A region that on the one hand, traditionally heavily relies on coal extraction, and on the other hand, has pioneered circular (bio)economy since the early 2000s. The region has always been in the forefront of innovation and has become one of the leading regions in the field of circular economy.
H24NewAge
H24NewAge has as a main objective the development of advanced technologies and his industrial transformation to boost the positioning of the centers and spanish businees in the hydrogen value chain, and in partiuclar in the production, storage and distribution of hydrogen.