CARTIF PROJECTS
INFIT
Keeping the safety of the entire rail network
Description
Keeping the safety of the entire rail network and, above all, critical elements such as tunnels, becomes a fundamental and priority objective for the Strategic Plan of Infrastructure and Transport (PEIT). For this, the potential causes of problems must be detected, usually cracks and fissures, and their growth must be controlled. Current evaluation systems are slow, subjective and unreliable.
In INFIT, automatic data capture systems have been developed to obtain an accurate and objective image of the tunnel surface. New tools have been developed that are capable of detecting, classifying and monitoring the cracks and fissures that may appear, as well as a system for the prevention of potential risks that may affect the integrity of tunnels, users and workers.
Objectives
- The development of a new railway tunnel inspection system based on the integration of image acquisition devices and active lighting equipment capable of highlighting fissures or cracks.
- The development of detection algorithms to facilitate the location and measurement of size and orientation of cracks and fissures that may jeopardize the integrity of the tunnel.
- The implementation of monitoring tools that allow the evaluation of the growth of defects detected through analysis and comparison of successive periodic inspections.
Actions
- Analysis and specification of the technical requirements of the tools for inspection, detection and tracking of cracks and fissures.
- Development of a crack inspection prototype, designing its architecture, synchronizing the acquisition devices and manufacturing the platform.
- Technologies and methods of detection, measurement and tracking of fissures using image processing algorithms.
- Integration, prototype validation and demonstration of the complete system in real environments.
Expected results
- An inspection system of 100% of the surface of the tunnel through the use of linear cameras with a resolution per pixel between 1- 0.25 mm2.
- Crack detection algorithms for the location and determination of size and position of cracks and fissures.
- Tracking tool that automatically, accurately and objectively evaluates the growth of the cracks detected by algorithms for comparing successive inspections and automatically generates monitoring reports.
Partners:
INNPACTO 2012
INFIT: IPT-2012-0980-370000
Presupuesto total: 620.006,75 €
Contribución 206.289,70 €
Duración: 24 meses: Octubre 2012 – Octubre 2014
Responsible
Roberto Medina Aparicio
Divison of Industrial and Digital Systems
Networking
Cultural and natural heritage projects:
Mapping of energy demand
TECHNOLOGICAL OFFER Mapping of energy demandDescriptionEstimation and visualization of the demand, consumption and CO2 emissions of buildings in urban or rural environments based on public information mainly from the cadastre and materials catalogs. The results can be...
Estimation of the CO2 emissions balance in a municipality
TECHNOLOGICAL OFFER Estimation of the CO2 emissions balance in a municipalityDescription Estimation of the CO2 emissions balance in a given municipality in order to evaluate its current status and the influence of the general approach of urban planning in this...
Implementation of CityGML for buildings and districts
TECHNOLOGICAL OFFER Implementation of CityGML for buildings and districtsDescription Realization of CityGML models for new and existing buildings and districts from 2D or 3D planimetric information for planning services, information management, etc. Our service:...
Development of Geographic Information Systems
TECHNOLOGICAL OFFER Development of Geographic Information Systems Description Development of customized Geographic Information Systems for public and private institutions that let them manage the geospatial information and the data bases in accessible visual...
Training in development of actions related to natural resources
TECHNOLOGICAL OFFER Training in development of actions related to natural resources Description Knowledge and care of the natural environment that surrounds us and in which we live is the guarantee of its maintenance over time. The correct management of the assets...
Testing and development of new photocatalytic materials
TECHNOLOGICAL OFFER Testing and development of new photocatalytic materialsDescription Nature offers us a solution to eliminate certain environmental pollutants, such as NOX, SOX, and VOCs, thanks to the action of sunlight.Taking advantage of the principle of this...
Modeling of scope and analysis of polluting atmospheric emissions
TECHNOLOGICAL OFFER Modeling of scope and analysis of polluting atmospheric emissions Description According to the WHO, air pollution is the responsible of the death of around 7 million people each year, making it the world's greatest environmental health problem.In...
Cartographic production based on orthophotos, satellite images and LiDAR
TECHNOLOGICAL OFFER Cartographic production based on orthophotos, satellite images and LiDARDescription Customized cartography and at different scales from orthophotos, satellite images and LiDAR, using Geographic Information Systems like ArcGIS, QGIS or Global...
NBS – Renaturing of urban and industrial spaces
TECHNOLOGICAL OFFER NBS - Renaturing of urban and industrial spacesDescription Improving well-being, air and water quality are necessary in the face of increased pollution and the effects of Climate Change.Nature-Based Solutions (NBS) offer "green tools" to mitigate...
Development of Plans for Urban Mobility
TECHNOLOGICAL OFFER Development of Plans for Urban Mobility in Cities and for CompaniesDescription Development of an Urban Sustainable Mobility Plan, where a set of actuations are defined with the objective to implant means of transport more sustainable (walking,...
Evaluation of Plans of Action for the Climate and Energy Sustainable (PACES)
TECHNOLOGICAL OFFER Evaluation of Plans of Action for the Climate and Energy Sustainable (PACES)Description The Covenant of Mayors requires the compromise of following-up every two years after the adoption of its Action Plan, and evaluate the degree of fulfilment...
Development of Plans of Action for the Climate and Energy Sustainable (PACES)
TECHNOLOGICAL OFFER Development of Plans of Action for the Climate and Energy Sustainable (PACES)Description The plan includes an Inventory of Reference Emissions in order to follow up the mitigation actions and one Evaluation of Risks and Climate Vulnerabilities that...
Development and evaluation of Climate Change Adaptive Strategies
TECHNOLOGICAL OFFER Development and evaluation of Climate Change Adaptive StrategiesDescription Development, evaluation and drafting of strategies to adapt to the climate change in municipalities in order to face and mitigate the effects of the climate change. This...
Development and evaluation of strategies for energy transition matters
TECHNOLOGICAL OFFER Development and evaluation of strategies for energy transition mattersDescription Development, evaluation and redaction of strategies in the matter of energy transition for Spanish and European cities and municipalities in order to guide the urban...
Development of Strategic Plans for Cities
TECHNOLOGICAL OFFER Development of Strategic Plans for CitiesDescription Development of an strategic plan for any single city or region through a participative process that would allow tackling the urban phenomena from an integrated point of view. Its definition...
BioSFerA
BioSFerA aims to develop a cost-effective interdisciplinary technology to produce sustainable aviation and maritime fuels. The overall process, combining thermochemical, biological and thermocatalytic parts is based on the gasification of biomass and other biogenic waste and the 2-stage fermentation of the produced syngas.
ITEHIS
Inovative and digital technologies to proceed to the technical inspection of historical buildings for public or private use. The methodology proposed is based on the HBIM (Heritage BIM) paradigm
SMART CHEMISTRY
The exploitation of biomass and products of plant origin for obtaining energy dates back to the beginnings of the Industrial Revolution.
CIRCULAR ECONOMY
One of the first research lines in CARTIF was the one focused on agrofood. Optimize the manufacturing processes, develop new products, waste recovery, and extraction and isolation of natural products.
20 YEARS
As a research centre, one of the objectives of CARTIF has always been to obtain an international presence. Aware that science, technology and innovation are a universal heritage that requires the sharing of information.
WINERIES AND VINEYARDS
Valladolid, where CARTIF is based, is one of the most fortunate regions in Spain because it is surrounded by extensive wine-producing areas with a great variety of grapes and some of the best Designations of Origin in Spain and the world.
Nº ESPECIAL
These 20 years of existence of CARTIF have coincided with a period very interesting from several points of view: historical, political, economic and technological, both in Spain and in the rest of the world.
RESEARCH
Research in a technology centre such as CARTIF, emerges from the necessity of improving the processes of production, diffusion and use of scientific and technological knowledge.
SILVER ECONOMY
According to one of the latest population projections from the National Statistical Institute, in 2050 there will be 7,2 million more people in the “over 64” age group, which will make up to 37% of the overall population in Spain.
CLIMATE CHANGE
This month of June has been marked by various events and episodes related to global climate change, energy efficiency and the environment.
BEMS
Currently, energetic refurbishment of buildings has become a necessity that yields great social, economic and environmental benefits.
HOSPITALS OF THE FUTURE
Hospitals contribute significantly to climate change owing to the natural resources and products they consume, as well as the waste generated from service deliveries.
RENATURING CITIES
The 21st century world is facing important environmental challenges that directly affect human beings and the rich biodiversity that surrounds them.
INDUSTRY 4.0
From the second half of the eighteenth century to the present, the global industry has lived several and deep transformations in order to adapt itself to the demand and take the most of the suitable technology.
Call for Applicants from CBIM European Training Network
Are you interested in research in the area Building Information Modelling? Would you like to join an international research and training network in the area of Cloud-based Building Information Modelling (CBIM)? Do you want to further your career and attain a PhD in...
Intrusión-G4
The Intrusion-G4 project seeks new technologies to overcome the challenge of increasing the degree of security of the intrusion detection sensors currently available on the market.
IDET
IDET is an innovative project aimet at creating a set of technologies that backbone an integrated development environment that facilitates the creation of rehabilitation therapies for robotic systems.
MiniStor
MiniStor aims at designing and producing a nvel compact integrated storage system for achieving a sustainable heating, cooling and electricity storage adaptable to residential buildings.
CARTIF, first Spanish Technology Centre with Natural Based Solutions Laboratory
CARTIF launches its Nature-Based Solutions Laboratory (NBS-Lab), thus becoming the first Spanish technology centre to have this type of facilities. This laboratory will allow to investigate natural solutions as an alternative to traditional urban solutions, favoring...
ALGAECAN creates a sewage treatment system with algae pioneer in Europe
The LIFE ALGAECAN project, led by CARTIF, is successfully testing a wastewater purification system from vegetable processing that uses microalgae, a pioneering technique in Europe. This initiative is funded by the European Union through the LIFE program, the Union's...
MUSEGRIDS
The MUSE GRIDS project wants to contribute to the development of interconnected local energy network management systems to make better use of the synergies between these networks.
ATELIER
ATELIER is a demonstration project whose main objective is the design, implementation and validation of Positive Energy Districts (PEDs) in Amsterdam and Bilbao
CARTIF Fundations obtains AIRBUS ‘MERIT’ rating
The CARTIF Technology Centre has recently obtained the MERIT rating by the aeronautical manufacturer AIRBUS, thus recognizing the excellence, technical competence and high performance offered by the CARTIF Analysis and Testing Laboratory for the characterization of...
“The lighthouses have been built, we now need to cast our light towards other cities”
After 5 years of work, the European REMOURBAN project, coordinated by the CARTIF Technology Centre and which has one of its demonstration cities in Valladolid, exhibited on Thursday, October 17 in the city of Nottingham the exciting results obtained in the framework...
CARTIF hosts the launch meeting of the TALENT european project
The new European project TALENT has already started. The launch meeting of this initiative led by CARTIF has taken place today at the center's facilities in the Boecillo Technology Park. This proyect, which brings together Spanish and European partners, will last...
INTERPRETER
INTERPRETER will overcome these limitations by means of a modular grid management solution consisting of a set of 10 software applications for an optimal design, planning, operation and maintenance of the electricity grid
TALENT
The TALENT project aims to increase the flexibility of the electrical system by reducing the cost associated with the integration of batteries in the electrical network.
REWARDHeat
The overall objective of REWARDHeat is to demonstrate a new generation of low-temperature district heating and cooling (DHC) networks, which will be able to recover renewable (RES) and residual (WH) heat available at low temperatures.
CARTIF participates in the Life Landfill Biofuel project, which will generate fuel from landfill biogas
The European Commission has approved the development of the European Life Landfill Biofuel project, which will transform the biogas from landfill into biomethane. The ultimate objective of this initiative, which has the participation of CARTIF, is to demonstrate the...
The REMOURBAN project of CARTIF, an example of sustainable mobility in Valladolid during SEM19
The City of Valladolid is actively participating in the European Mobility Week and all thanks to the European REMOURBAN project, an initiative funded by the EU and coordinated by the CARTIF Technology Centre, which has boosted the use of electric vehicles in...
The mySMARTLife project, led by CARTIF, holds a ‘technological breakfast’ in Helsinki
On the occasion of the 6th follow-up meeting of the initiative, the mySMARTLife project, with CARTIF at the helm, has organized a ‘technological breakfast’ on Friday, September 20, 2019 in the Finnish city of Helsinki, where the research teams of the three cities...
LIFE myBUILDINGisGREEN gives a conference on architectural solutions based on nature
Within the framework of the LIFE myBUILDINGisGREEN project, of which CARTIF is a participating partner, the Provincial Counsil of Badajoz will give a conference on November 13 in the city of Badajoz about the impact and functionality of Nature Based Solutions (NBS) as...
Ciudad Rodrigo hosts the final event of the RENERPATH 2 project, coordinated by CARTIF
On September 18, the RENERPATH 2 project, led by the CARTIF Technology Centre, will offer an explanatory event on the energy rehabilitation of heritage buildings at The House of Culture of Ciudad Rodrigo. RENERPATH 2, which is in its final phase, aims to develop a...